Turkey's Leading Temperature Monitoring System
Turkey's Leading Temperature Monitoring System
ISI24 Temperature Monitoring System Pharmacy Detailed Installation...
As standard in your box contents;
ISI24 Main Device ( S1003 GPRS)
1 Cabinet Sensor (SENS101)
1 Ambient Sensor (SENS102)
Device sensor connection cables (Cabinet Sensor Cable 0.5m. and Ambient Sensor Cable 5m. )
1 Piece Power Adapter (12V 2A)
Sensor Calibration Documents (2 Pieces) (Keep to show in inspections.)
There is 1 Installation Information Form (You have passwords to login on the web) .
Please first of all, the physical installation of the Pharmacy on the previous page. your video watch.
​
Check the distance of your adapter cable to the socket before sticking your device to the cabinet.
​
Afterwards, make sure that your cabinet sensor (SENS101) is connected to the first port ( 1st port) from the left and your ambient sensor (SENS102) to the rightmost port (3rd port) as seen in the installation video. The middle port will remain empty. Otherwise, your environment and cabinet values will differ because your license is opened in this way.
​
NO NEED to connect your device to internet/modem!
​
After the physical installation is completed, turn on your device with the on/off button on it. If the device has electricity, it will turn on with a blue light on its screen. If it is not plugged in, the screen will not turn on, the device works with the battery inside. The battery duration is about 15-20 hours . Make sure you plug in your device.
​
What you should see on the device screen is shown in the video below.
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
If there is no signal problem in your device location, it will connect to the internet and start sending your data thanks to the M2M Data line inside. If you see your cabinet temperature and ambient temperature/humidity values on the device, the installation is complete.
If your device does not find a signal, please contact us.
​
​
Web control of your data and software training video;
​
Please go to www.dorukanbt.com and contact your institution in the installation information form given to you. Open the system by entering your special "program code" and "password".
​
You can find the training video about the software at the top of the screen after typing in the "program code" and "password" . The system is explained in detail in this video.
​
If you see your cabinet temperature and ambient temperature/humidity data on the screen you entered, the installation is completely completed.
​
